- T47 threaded BB cups for T47 frames and 22/24mm diameter spindle cranks
- Cups have internal bearings, and are typically used in BB shells with widths wider than 73mm
- Machined aluminum cups thread together directly into a T47 BB shell
- Bearings are easily serviced or replaced
- Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle
- T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread
- **Please Note: may not work with Quarq SRAM/GXP cranksets (Elsa, Riken, SRAM Red 22, SRAM S975, SRAM S2275, CinQo Saturn, Saturn2) when used in BB shells with widths of 86.5mm and wider - If the Quarq spider has an ID less than 49.5mm, the crank may rub on the BB cup
- Compatible with Quarq DZero powermeter spiders with GXP spindles except Eagle MTB
- BB SET WMFG T47 TO SRAM 24/22mm CRANK
Center: T47
Right: Sram GXP 24/22mm
Overall Length: Alloy
