Direct-Drive Hub Motor Conversion Kit w/ Pedal-Assist and Throttle On Demand functions. New programmable LCD!
This electric bike conversion kit without battery pack, is for
riders that want the simplicity and reliability of the 500w direct-drive
hub motor and the option of supplying their own 36 volt or 48 volt
battery pack. Direct-drive motors are strong, durable and long-lasting due to zero internal friction.
Who's it for? This kit is ideal for heavier applications with total loads (rider and gear) over 250lbs.
Any battery chemistry (Li-ion, LiFePO4, Lithium Manganese,
Lead-Acid, etc.) is acceptable, as long as the voltage is 36v or 48v AND
the battery is capable of 22Amp continuous discharge. The Amp
Hour (AH) battery specification is an indication of a battery's
capacity. A battery capacity of 10ah will typically deliver 20 miles /
32kms range.
The E-BikeKit™ is designed for convenience, performance, and reliability.
With
an LCD dashboard control panel and 36v/48v 12FET controller, the system
is easy to install and even easier to use. All E-BikeKit system
components are compatible with both 36 volt and 48 volt battery packs.
The controller and LCD are also compatible with all motor types offered
by E-BikeKit.
Conversion Kit Specs:
Watts (Nominal/Peak): 500-1000w (EBK 22amp controller)
Top Speed: Approx. 14 MPH @36v in 26" wheel / Approx. 20 MPH @48v in 26" wheel
Range: Depends on battery capacity(AH), total load, rider input and terrain
Performance: Medium
Efficiency: Low
Stealth Factor: Low
Battery: Not Included
Charger: Not Included
Any battery chemistry (Li-ion, LiFePO4, Lithium Manganese,
Lead-Acid, etc.) is acceptable, as long as the voltage is 36v or 48v AND
the battery is capable of 22Amp continuous discharge. The Amp
Hour (AH) battery specification is an indication of a battery's
capacity. A battery capacity of 10ah will typically deliver 20 miles /
32kms range.
Choosing Your Wheel Size: You can find your wheel
size written on your tire. Available size options for this conversion
kit are: 16", 20", 24", 26", 700c & 29er. Acceptable tire widths for
the E-BikeKit rims: 1.15"(29mm) - 2.25"(57mm).
comes with all of the parts you'll need for your conversion.
1 x USA hand-built wheel w/ disc-brake compatible hub motor
1 x 36/48V compatible 22amp 12FET controller
1 x Programmable LCD Dashboard
1 x PAS 12-magnet Split Disc
1 x PAS Sensor Left side mount (right by request)
2 x Throttles (1 Thumb & 1 Split-Twist)
2 x E-Brake handles (left & right)
1 x Motor cable
1 x Accessory cable
1 x Battery wire harness (kits w/o batteries only)
1 x 7-Speed Shimano Freewheel (rears only)
1 x Owner's manual w/ installation guide
***Zip Ties, c-washers & torque arms in every kit!